Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. G

    [SOLVED] I need help designing a simple circuit

    Thanks! Looks good! I'm going to try to build it this weekend!
  2. G

    [SOLVED] I need help designing a simple circuit

    The out signal will provide the same signal as the momentary switch. Yes, there are three conditions which can trigger the output signal. I'm not sure what vlsi means.
  3. G

    [SOLVED] I need help designing a simple circuit

    I haven't tested to see how long the output stays on but the momentary switch will cause the action to continue until it's limit switch has been reached. I do believe this is what you mean by latching. I'm learning so thanks for bearing with me.
  4. G

    [SOLVED] I need help designing a simple circuit

    Currently a momentary switch makes the desired output occur. I'm wanting that same action to occur when the vehicle is powered off or on (if the momentary switch wasn't used while the vehicle was on or off).
  5. G

    [SOLVED] I need help designing a simple circuit

    I've created this truth table as well. A B C D | A | ( C & ~ D ) | ( B & D ) ------------------------------------------------------- 0 0 0 0 | 0 0 0 0 1 0 0 0 0 0 0 0 0 1 | 0 0 0 0 0 1 0 0 0 1 0 0 1 0 | 0 1 1...
  6. G

    [SOLVED] I need help designing a simple circuit

    I'm a software engineer by day and I don't have any experience designing circuitry but I have a simple project which I was hoping you guys (or gals) could help me with. I currently have a momentary switch that triggers the circuit to close and prompt the action to occur I would like to...

Part and Inventory Search

Top