Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. K

    Confused with Q factor calculation of pi match in Thomas Lee's RFIC book chapter 3

    In Thomas Lee's RFIC book chapter 3 page 97, he gives an equation Qtot = Qleft + Qright for pi-match network。 However in book Electromagnetics for High-Speed Analog and Digital Communication Circuits by ali m. niknejad chapter 7.3 page 196,he gives an equation Qtot = (Q1 + Q2)/2。 There is a...
  2. K

    Moved]: how to calculate jitter when simulating the PLL

    I have a question. What's the authentic method to quantify the jitter when simulating the PLL used as a clock. I've tried two ways. First, do the transient simulation and use the eye diagram function in cadence to see the peak-to-peak jitter. As for this method, is the transient noise...
  3. K

    phase noise to jitter convertion

    As for a free-run oscillator, the jitter accumulates over time. The wavescope calculates jitter in a certain time windows. My question is if I want to know the rms jitter of a oscillator in a time range of ,maybe 4us , then what the is the frequency range for the integral of phase noise in...
  4. K

    [Moved]: jitter influence on TDC

    Can anyone give some information about this topic? background : The TDC is for 3-D radar for time measurement using a simple counter based structure. question1 : If the clock is from a vco, will the jitter accumution affect the final results? If yes, then how much difference will it lead...
  5. K

    Error when running VCS

    I'm running the simulation by VCS on my own mechine, but there are error when doing ./simv -gui as shown in picture. And the inter.vpd file isn't generated. Could anyone tell me how to do? Thanks~
  6. K

    About high frequency signal drive

    I am dealing with a 6.4mm2x6.4mm2 array chip, and there is a long high frequency signal line in the chip(about 180MHz, 1um wide ,3.2mm long ,and made of top metal). I want to know if this metal line is ok for the signal transfor, would the signal attenuation happen? If true, how can I consider...
  7. K

    [Moved]: about jitter accumulation

    For a VCO alone, the jitter is accumulated as the time goes, but a PLL don't, is this right? if right, then i want to know if a Frequency Locked Loop can null the jitter accumulation? (FLL is something like PLL,and its input and output signals are frequency, so the transfor function for the...
  8. K

    About Injection Locked Oscillator

    I need a 200MHz clock for TDC provided by ring VCO, but considering jitter accumulation conventional ring VCO doesn't fit. I want to design a injection locked ring oscillator, but can't find some proper paper. Can any one help me with some paper name? Another question is how to simulate phase...
  9. K

    How to explain jitter accumulation

    As for a single VCO, output clock wave is far more different from the wanted when the test time grows.can this call jitter accumulation? if not ,what is the real performance of jitter accumulation? As I found, PLL and DLL can reset jitter accumulation whereas VCO can't ,why ? Thank you for...
  10. K

    How to design a low jitter clock generation circuit

    I want to do a project about low jitter clock generation for SOC or ADC use.The main idea is to do PLL. Is there any suitable structure for low jitter performance? For example,can Sigma-Delta work for this particular use? In addition, the PLL is based on ring VCO for we use CMOS digital...
  11. K

    [SOLVED] How to simulate a ring VCO using HSPICE

    I'm learning HSPICE. When simulating a ring VCO, I can't get oscillating wave. It seems to be locked,but i'm sure the connection is right for the netlist is available on Cadence Spectre. Is there any issues. Thanks in advance.

Part and Inventory Search

Top