Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. C

    ckt with voice playback: Dspic30F4011 detailed information

    Dspic30F4011 Hi I think DsPIC30F4011 will be used for motors control not for voice playback. It was many others dspic with voice capabilities. CD:D
  2. C

    Project to replace CY7C64613 in the ICD2

    Hi Search icd2.ini on "documents and settings" CD:D
  3. C

    Project to replace CY7C64613 in the ICD2

    hi, you can force power mode in icd2.ini file. I've the same problem, I've modify this file, and it works. If you change target, with another OS, you must redo this manipulation. The original icd2 must have external power with dspic. CD:D
  4. C

    Battery Charger with microcontroller

    ltc4412 battery charger Hi You can find some dedicaced circuits on maxim website. Max712 or 713, are useful to design simple and low cost battery charger. CD:D
  5. C


    Re: DC 12V MOTOR CONTROL . FWD , REV , SPEED CTRL , 4WD , BR Hi, For little power you can use integrated Hbridge (L292; L298; LMD18200). This circuits contain current measure and braking command. CD:D
  6. C


    Re: DC 12V MOTOR CONTROL . FWD , REV , SPEED CTRL , 4WD , BR Hi, Very strange braking solution !!! It's looks like battery's short-circuit. Be careful with this solution your accumulators can explose. CD:D
  7. C

    How to import a picture in PCB environment as a conductor layer?

    pcb-picture Hi Search for bmptopcb freeware. This soft convert black and white picture in bitmap format to protel pcb format. CD:D look at this link : **broken link removed**
  8. C

    simple question about timer0 PIC18F

    timer0 pic18f Hi, Your subroutine is not an interrupt subroutine !!! Put your "if" test in an interrupt subroutine (look at comiler documentation for correct syntax).Don't forget TMR0 interrupt flag must cleared at the end of the interrupt routine. Wich compiler did you use ? CD:D
  9. C

    PICKIT2 - 43 x 60 MM PCB

    tomeko.net Hi, Thanks shiveni for the PCB, but can you post your schematic in PDF format and silkscreen ? Many thanks CD:D
  10. C

    PICKIT2 - 43 x 60 MM PCB

    pickit2 Hi, Good job. Can you post yours schematic and your PCB in PDF format ? Thanks CD:D
  11. C

    ICD-S40 vs ICD-U40 vs IDC2. Comments ?

    icd-s40 icd-u40 Hi, CCS comparaison is very funny !!! I've an ICD2 and it works larger than one step per second. I don't know exactly the time between two steps, but it looks like 0,2 second. I'm sure ICD2 on USB is the fastest way to debug without ICE. Probably CCS use the serial...
  12. C

    LM7805 Output Voltage Too High

    lm7805 iout Hi, Sure you've invert input and output. Be careful, 78L05 and 7805 have the ouput and the input invert. front view -------- | o | |------| | | |------| | | | | | | IN GND OUT
  13. C

    What type of ICD-2 should I use with PIC18f5480?

    Re: ICD-2 Hi, the advantage of ICD2 with 18F4550 is the speed to program and the speed to debug. To compare the debug step time between RS232 and USB, you'll found >4 steps per second for USB and <1step per second for RS232. If you bought it from microchip, it'll cost about 150$. If you want...
  14. C

    This is a working RS232.... ICD2 !!!!

    Hi, My RS232 ICD2 works well with MPLAB 7.5 and highter !!!! If you want an ICD2 on USB port take look at the topic on edaboard: You'll find everything to build a full speed USB ICD2 clone. CD:D
  15. C

    driver for an usb port ICD2

    crazyt things to connect to a usb port Hi, Real microchip ICD2 or clone, it isn't any problem !!! The ICD2's module works only with MPLAB. When you make MPLAB installation, be sure you've selected ICD2 tools on the setup option CD:D
  16. C

    driver for an usb port ICD2

    driver de instalação icd2 usb port Hi, This driver is contains with any MPLAB installation. Look on C:\Program Files\Microchip\MPLAB IDE\ICD2\Drivers you'll find the driver and the installation instructions. CD:D
  17. C

    Function generator with max038 (elektor 1995)

    max038 elektor Hi, There are all the files to build 10 to 10MHz function generator. Sources files from elektor 06:1995 CD:D
  18. C

    Project to replace CY7C64613 in the ICD2

    salut mindstorm88, C'est quand même bizarre ton truc !!! C'est bien au niveau de la réconnaissance par le PC qu'il y a un pb ? Quelle version de MPLAB utilises tu? Je vais tenter une re-install du driver sur un autre port USB. regardes (si toutefois ce n'est pas déjà fait la procédure de...
  19. C

    Project to replace CY7C64613 in the ICD2

    Hi, You can find a simple programmer on LPT of your computer (if you have it). Search for PROPIC2 on www.propic2.com. This version doesn't need a programmed PIC (only for the gold version). For the software you can use ICPROG (it's freeware but you can only programm the 16F877A) and perhaps...
  20. C

    Project to replace CY7C64613 in the ICD2

    Hi Spork, You can request free samples on some website (like Texas Instruments, Maxim, Microhip). Take a look on this websites and follow the sample request form. You must be registered (it's free) to purchase sample request. To program 877A and 4550 you must have an ICD2 or another...

Part and Inventory Search