Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
gallager solution manual
any1 has solutions to gallager book (lecture notes) principles of digital communications-I . Please send a link or post it.
the url for the course :
I M UISNG AT89C5131(8051 MICROCONTROLLER) , WHICH IS CONNECTED TO AN ANTENNA IC. THE MODULATED DATA OUTPUT FROM THE TRANSPONDER IS DEMOCULATED BY THE ANTENNA IC.
NOW THE DATA OUTPUT FROM THE ANTENNA IC IS TRANSFERRED TO PORT 2.......
CAN ANYONE HELP ME IN READING IT WITHOUT UISNG LCD/UART??
I am using the phillips hitag HTRC110 chip as a RFID read/write chip and i have interfaced this with an AT89C51 microcontroller. . I have the C- Code for Hitag 2 system from phillips. However it is very difficult to understand..
I AM USING IT ONLY FOR READ MODE . i khow fr0m the datasheets , how...
I AM USING SPI TO INTERFACE HTRC110 & 8051 . I HAVE ALL THE CODES HTRC110 .
I WANTED TO KNOW HOW TO INITIALIZE AND CONTROL HTRC110...
IF ANYONE HAS WRKD WID HTRC110 DEN PLZ PROVIDE SOME BASIC HELP TO ME AS I AM NEW TO THESE THINGS.....
I WANTED TO KNOW HOW TO SEND CONTROL COMMANDS TO...
my tag uses manchester/biphase coding . can i use htrc110 (4m philips) on d base station side aith atmel mega 32? i need help in deciding which base station interface ic to use and how 2 choose a compatible microcontroller wid d same...
i m using htrc110 and atmel mega 32 in a rfid project .. i m not sure of d compatibility of the two ics . how can i get d information that which microcontroller is suitable wid htrc110..
one more problem is that my tag uses manchester coding .. can i detect d same using htrc110
i neeed help...
need simulation example for INDUCTIVE COUPLING and a bit explaination on which model to use 4m the libraries ??? how to view the changes in voltage across both the inductors .... thanks
i need help to simulate the circuit posted below...
d problem is how to simulate the whole circuit ????
link 4 d ckt--
how to place the transponder and its ground ...???
any body please help me out.. i m using multisim/.pspice
My problem is when I design circuit, I dont know how to choose Antenna for them. How many way to design antenna? Could I draw antenna on board?
I can not find out any documents about that.
any link or doc or anything would be of great help to me