Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. princez

    [moved] Xilinx Ethernet Interface

    Actually i want to transfer my data using 10G Ethernet connection. Xilinx offer variety of cores for 10G. There are some that state they are MAC and some that state the core has just PCS/PMA. What do i actually need to transfer my data from FPGA to another card, using 10G Ethernet connection?
  2. princez

    [moved] Xilinx Ethernet Interface

    Hello, I need guidance on using SFP port on ML605. I am unclear which IP core to use with it. There are a number of 1G and 10G cores available which confuses me. There are cores which state that they are MAC controllers, while some say they implement the PCS/PMA . which one do i exactly need?
  3. princez

    10Gb/s data over gigabit Ethernet port

    Hello, I have a simple question. I have a Gigabit Ethernet port in my PC/system. Can i use it as 10 Gb/s port just by updating the MAC drivers ?
  4. princez

    Damaged grounding pin of FPGA ACTEL A3P1000

    Hi, I am using A3P1000 FPGA. Somehow its pin number 1 got damaged. As I can see from the data sheet that this pin is a grounding pin of bank number 3. On the same bank, pin 17,25,1,29 and 41 are also ground. Can I leave that broken pin unconnected and sold the FPGA on my card? will it degrade...
  5. princez

    LinkSprite JPG camera ..(Problem with Chunks)

    yes i saw the tutorial.. every thig is fine when i take the picture as a whole.. but when i take in chunks it gives problem ---------- Post added at 20:42 ---------- Previous post was at 20:40 ---------- is there any one who have taken picture from this camera in chunks??
  6. princez

    LinkSprite JPG camera ..(Problem with Chunks)

    PLEASE HELP ME OUT ASAP!!!! ITS REALLY URGENT! i am using this cam.. everything works perfectly fine when i read the image in one go.. the problem arrives when i start to read its image in chunks. i get FFD9 twice or thrice, and the data is corrupted. Please suggest me the solution, what am i...
  7. princez

    PIC C Oscillator Problem

    I also want to know that is there any way to check at which speed or clock my micro-controller is working?? any way to know it on hardware??
  8. princez

    PIC C Oscillator Problem

    hello. I am trying to program my PIC18F4550 to work with external 20Mhz Oscillator. I have tried each and every single command i came across the reference manual for PIC-C programming language, but i am not successful to accomplish my task. Here's my code, #include<18f4550.h> #use delay...
  9. princez

    PIC18f4550 interfacing with 62256 COMS SRAM

    Hello, I am doing a project, in which i have to interface a serial camera with PIC18f4550, and in order to store that image i am using 62256 RAM. My problem is that i don't have any circuit diagram to proceed. Can any one please provide me with a circuit diagram explaining how to interface the...
  10. princez

    need code for 62256 RAM with PIC18f452 on mikroBasic

    hay .. do you have the circuit diagram for your circuit in which you are interfacing PIC with 62256??
  11. princez

    Check sim300 receive ok with MC

    can u tell me how to make a simple test to use GPRS on sim300? i mean can u give me the sequence of commands u entered to use GPRS on hyperterminal? i think my device's GPRS is not working properly, so i need help.
  12. princez

    +CMS ERROR: 515 - Sim340dz

    yes i used at+cgsms=? command and it returns +CGSMS: (0-3) . I think my modem's GPRS is nor working properly, can you please tell me how to make a simple test to check if GPRS is working properly or not?
  13. princez

    +CMS ERROR: 515 - Sim340dz

    i m getting the same error.. actually i am trying to send SMS over GPRS link. following is the command sequence i am following. AT+CGATT=1 AT+CGSMS=0 AT+CMGS="number" >message ctrl z +CMS ERROR 515 CMGS is working fine with when at+CGSMS=1 and 3 i thought there is some problem with gprs, but...
  14. princez

    Problems with sending SMS messages with sim300 modem using AT commands

    hay, i am using sim300 and i am also getting the same error. actually i am trying to send sms with gprs link. following is the command sequence i am following. AT+AGATT=1 AT+CGSMS=0 after this i wait for a while and then send the sms sending command. AT+CMGS="mob num" >message then ctrl z...
  15. princez

    What's the reason of +CMS ERROR: 515 ?

    hay, i am using sim300 and i am also getting the same error. actually i am trying to send sms with gprs link. following is the command sequence i am following. AT+AGATT=1 AT+CGSMS=0 AT+CMGS="mob num" >message then ctrl z +CMS Error 515 whats going on wrong?? please help.
  16. princez

    GPRS SMS.. is it actually possible ?

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...
  17. princez

    SENDING SMS THROUGH GPRS - help needed

    Re: SENDING SMS THROUGH GPRS hay.. got any success on sending SMS through GPRS?
  18. princez

    Gprs sms

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...
  19. princez

    Gprs sms

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...

Part and Inventory Search

Top