Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. princez

    [moved] Xilinx Ethernet Interface

    Hello, I need guidance on using SFP port on ML605. I am unclear which IP core to use with it. There are a number of 1G and 10G cores available which confuses me. There are cores which state that they are MAC controllers, while some say they implement the PCS/PMA . which one do i exactly need?
  2. princez

    10Gb/s data over gigabit Ethernet port

    Hello, I have a simple question. I have a Gigabit Ethernet port in my PC/system. Can i use it as 10 Gb/s port just by updating the MAC drivers ?
  3. princez

    Damaged grounding pin of FPGA ACTEL A3P1000

    Hi, I am using A3P1000 FPGA. Somehow its pin number 1 got damaged. As I can see from the data sheet that this pin is a grounding pin of bank number 3. On the same bank, pin 17,25,1,29 and 41 are also ground. Can I leave that broken pin unconnected and sold the FPGA on my card? will it degrade...
  4. princez

    LinkSprite JPG camera ..(Problem with Chunks)

    PLEASE HELP ME OUT ASAP!!!! ITS REALLY URGENT! i am using this cam.. everything works perfectly fine when i read the image in one go.. the problem arrives when i start to read its image in chunks. i get FFD9 twice or thrice, and the data is corrupted. Please suggest me the solution, what am i...
  5. princez

    PIC C Oscillator Problem

    hello. I am trying to program my PIC18F4550 to work with external 20Mhz Oscillator. I have tried each and every single command i came across the reference manual for PIC-C programming language, but i am not successful to accomplish my task. Here's my code, #include<18f4550.h> #use delay...
  6. princez

    PIC18f4550 interfacing with 62256 COMS SRAM

    Hello, I am doing a project, in which i have to interface a serial camera with PIC18f4550, and in order to store that image i am using 62256 RAM. My problem is that i don't have any circuit diagram to proceed. Can any one please provide me with a circuit diagram explaining how to interface the...
  7. princez

    GPRS SMS.. is it actually possible ?

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...
  8. princez

    Gprs sms

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...
  9. princez

    Gprs sms

    I have received and sent sms using GSM modem.. now i want to send data packets at a higher rate, so while googling i came to know that we can send sms using GPRS connection, and these sms are sent at a heigher rate because GPRS got a heigher bandwidth.. can any one please help me with it? is it...
  10. princez

    What to use thermocouple or thermistor???

    Hi, i am doing a project ; whose part is to measure patient's temperature. can any body help me with the sensors??? what to use thermocouple or thermistor?? Please refer some links and circuit designs. (thx in advance for helping me ). Regards.

Part and Inventory Search

Top