Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. B

    A question about Modelsim Waveform

    In my DO file, I want to write some script to detect if there is any active waveform window in Modelsim. Are there any modelsim commands that I can use to do that?
  2. B

    Can I use clock with frequency lower than 125 MHz for DDR2 ?

    DDR2 clock frequency because I have system clock in this frequency, if I could do this, this is the easiest way.
  3. B

    Can I use clock with frequency lower than 125 MHz for DDR2 ?

    Hi, As we know, in principle the DDR2 requires at least 125MHz clock frequency. Is it a problem if I use a clock which is a little slower than 125MHz, say 122M-124M?
  4. B

    Does modelsim support systemverilog simulation now?

    systemverilog in modelsim if so, which version? thanks.
  5. B

    The filename extension of systemc

    Hello, In systemc, what kind of files should be named as *.cpp and as *.h?
  6. B

    Questions about SystemC syntax/support

    questions about systemc 1. Is this syntax correct, a is a bool type variable, and b is a bit_vector type variable? a = b.range(15,0).and_reduce(); 2. Does Modelsim support the mixed-simulation with system-c and VHDL/verilog, for example, testbench is written in systemc and DUT is written in...
  7. B

    If I instantiate Altera PLL to LVDS mode can I reconfigure the LVDS clock output freq

    I have a question about altera PLL, if I instantiate a PLL to LVDS mode in stratixII, is it possible to reconfigure the frequency of LVDS clock output(sclkout) on-the-fly? thx.
  8. B

    Sync Reset or Async Reset

    asyn, use reset synchronizer to avoid metastability
  9. B

    Why many EDA vendors use TCL/TK to develop their EDA tools?

    Re: Why use TCL/TK? why use Tcl/tk, rather than other script language, e.g. perl. python, shell......
  10. B

    I wang study SystemC,are there any examples for primers .

    There is a book called "A Systemc Primer", U can download it in this forum.
  11. B

    SystemC to GDSII !is it a dream?

    I think SystemC is hard to be accepted by industry, especially in ASIC design. There are a lot of risks and cost. For example, convert system level SystemC codes to synthesisable SystemC code aslo need some work. Company aslo need defined new coding rules for synthesisable SystemC code, systemC...
  12. B

    Do we need Matlab as an ASIC designer ?

    I think in the system modeling e.g. telecommunication system, matlab is widely used. And also generates test data for verification .
  13. B

    SystemC to GDSII !is it a dream?

    Well. I think SystemC will have good future in academic. But hardly accepted by industry.
  14. B

    SoC system level simulation

    I think systemverilog and VHDL 200X will be the future.
  15. B

    SystemC to GDSII !is it a dream?

    I think SystemC is hardly accepted by industry recently. especially in RTL and lower level. It is far from the vhdl and verilog. I think systemverilog and VHDL 200X may be better.
  16. B

    How to install SystemC lib under Windows?

    systemc.lib I use Dec C++ The install file in the zip file of systemc lib only introduces how to use SystemC in Visual C++..
  17. B

    What is the syntex of synchronous reset in VHDL?

    should it be if clk'event and clk = '1' then if reset = '0' then ------ else if ........then elsif.......then ------- else -------- end if; end if; end if; or if clk'event and clk = '1' then if reset = '0' then...
  18. B

    what is hot-topic in digital design now?

    I guess NoC is "Network on Chip"
  19. B

    usage of Perl script?

    Then in ASIC design, the main usage of perl is file operation?
  20. B

    usage of Perl script?

    Besides the text r/w operation. e.g find/replace in netlist files.etc... are there other usages of Perl stript?

Part and Inventory Search

Top