Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. M

    Looking for Atmel AT76c510 datasheet

    at76c510 datasheet No, you can't. It has only a summary datasheet.
  2. M

    Looking for Atmel AT76c510 datasheet

    I'd like to reprogram a wifi AP that uses this SOC. Does anybody has AT76c510 data-sheet? MM
  3. M

    Has Microchip reached #1 sales at 8 bit uC's?

    Ok, but that does not mean that PIC is the most pópular/used uC among all. Other lines of uC, like 8051 has more than 50 sources. You'd have to sum all to know how much 8051 variants are used MM.
  4. M

    Very low power magnetic sensor

    Hi, I'm looking for a magnetic field sensor (on-off) with very low power comsumption. The Hall sensors I've seen use some current to bias the device and so are not suitable. The low power hall devices switch internally this current, so suffer from maximum frequency of operation. Somebody...
  5. M

    What kind of revision control system people on this site use

    I forgot to say that SVN is free and open source. Really better than CVS. Do not know about clearcase.
  6. M

    vb6 and parallel port

    vb6 print to parallel port Userport is a generic driver (.sys) that use some special undocumented function calls in windows to grant access to any port to any user. All you need is run the executable once. You need administrator rights to install. No especial DLL is needed. You CAN use normal...
  7. M

    Where in Europe can I get ARM cpu?

    I could not understand the name of the companies or of the chips. Plz fix.
  8. M

    P/S/D 14.2 nic not connected problem

    I installed C@dence P/S/D 14.2 in a XP in node locked license mode with a keys from a keygen. I have a realtek 8139 NIC installed, but not connected to anybody. The program does not start with a message that there is no NIC in the computer. When i'm connected through dial up, I can use all the...
  9. M

    What kind of revision control system people on this site use

    Try SVN - a new version control system. It seems better than CVS in all ways. Based on http protocol over port 80. Lacks a good GUI however.
  10. M

    vb6 and parallel port

    port32.ocx xp In the 32 bits operating system (like NT, 2000 & XP) you cannot access directly. You need a driver. There is a generic driver called "userport" (google it). You may need also to code assembly routines for input and output ports. The userport package come with examples. M&Mfuria
  11. M

    how to driver LCD driver IC without LCD controller IC

    Oh hell ! The full name of the chip is S3C44B0X and u find them under mobile computing! M&M furia
  12. M

    how to driver LCD driver IC without LCD controller IC

    I could not find those samsung chips.
  13. M

    Regarding Get2Chip RTL synthesis tool

    Syn0psys is the competition... For what I've read - they should care ...
  14. M

    Regarding Get2Chip RTL synthesis tool

    Get2Chip?? The RTL synthesys seems to be good - as C@dence has acquired the company. Does someone uses or know something about it?

Part and Inventory Search