Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. C

    DC/DC application design

    Hi hi, If I use the DC/DC output of a buck converter to supply to the input of another DC/DC buck converter, will this affect the performance of the 2nd DC/DC converter output? Thanks.
  2. C

    Inductor on Buck DC/DC converter

    Hihi, Are there any difference in using chip inductors and power coil inductors on Buck DC/DC converter? Thanks.
  3. C

    What is the difference between SPICE and Pspice simulation?

    What is the difference between SPICE and Pspice simulation? Or are they similar? Thanks. :D
  4. C

    Efficiency of DC/DC Converter

    How is the power efficiency of a DC/DC converter (step-down or step-up) determined? Is it Efficiency= (Vout × Iout) ÷ (Vin × Iin) ??
  5. C

    PCB Antenna Simulation

    For IE3D, it defines an infinite ground plane. Will this affect the accuracy of the result?? Thanks.
  6. C

    PCB Antenna Simulation

    pcb antenna simulation Hi hi, I would like to design and simulate a printed/PCB antenna for 2.4GHz application to find out its performance. I am thinking of using either IE3D or HFSS. Which one would give a more accurate simulation results closer to the actual? Thanks. :D
  7. C

    Guidelines for designing PIFA antenna

    Is there any guidelines/techniques/method for designing PIFA antenna? How does the dimension/shape relates to the resonant frequency and bandwidth?? Thanks.
  8. C

    Planar Metal Antenna design

    For a start to design, what parameter should be look at? the surface area?
  9. C

    RF Choke for DC biasing

    For DC biasing for power amplifiers or diode switches, Inductors are often used as RF choke. How do we decide the value of inductor to use for the RF choke?
  10. C

    Planar Metal Antenna design

    Hi all, Is there any design guidelines for planar metal antenna?? Thanks.
  11. C

    Sensitivity of RF Receiver

    Thanks estradasphere. Is there any equations or methods that can be used to find out the receiver sensitivity theoretically?
  12. C

    Sensitivity of RF Receiver

    Hi all, How can we determine the sensitivity of a RF receiver? Thanks.
  13. C

    Looking for textbook about audio circuit design

    Hi everyone, Are there any good textbooks/references on audio circuit designs? Thanks.
  14. C

    Can a small piece of metal sheet by used as an antenna?

    Hi hi, Can a small piece of metal sheet by used as an antenna?? Thanks.
  15. C

    Placement of antenna on circuit

    Hi, Does placement of antennas near other circuit components like inductors and crystal oscillators have an effect on the radiation efficiency and other performances of the antenna? Thanks. ckJJ
  16. C

    How to decide the required length based on operating freq. ?

    Re: wire antenna design Does the diameter of the wire matters as well for antenna design? ckJJ
  17. C

    How to decide the required length based on operating freq. ?

    wire antenna design Hi hi, For wire antennas, how do we decide on the length required based on the wavelength of the operating frequency? ckJJ
  18. C

    FR4 as PCB substrate for circuits at above 1 GHz

    Hi, Is FR4 a good choice of PCB substrate for circuits that operates at above 1 GHz? Thanks.
  19. C

    Spectrum Analyzer Measurement

    I increased the attenuation by 10dB, there is a change in the Peak value of the signal ckJJ
  20. C

    How to find out the operating frequency of a Co-axial cable

    how to find operating frequency Hi hi, There are many specifications and types of co-axial cables available. Is there a way to find out the operating frequency for co-axial cables? Thanks ckJJ

Part and Inventory Search

Top