Search:

Type: Posts; User: siXence

Search: Search took 0.00 seconds.

  1. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    I am going to replace it just to be sure it's not the culprit, tomorrow i will buy the parts i need i will be buying a "100v 47uf eletrolytic" and that "b 101k 2kv" thanks for the attention peace i...
  2. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Im Sure its going bad, if its not bad it will go bad soon, the readings oscilate a lot from 90 to 93/94 now, it can be the meter batery but i believe the capacitor is going bad or about to hints,...
  3. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    :bang: I forgot to mention: The readings are oscillating a lot from 91 to 91.1/91.2/91.3/92 sometimes 95 its bad right tell me this is the issue im losing hope :shock:
  4. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    It's a B-101k 2kv capacitor i took it out of circuit right now, B stands for +0.1Pf and the meter values are 91.3 pf, i think its bad ? +0.1pf tolerance ? :bang:
  5. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Hello again, after some time away from home i finally got able to test the transformers and some other components, unfortunatelly all seems to be good. My last hope is a Ceramic Disk Capacitor a very...
  6. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    I will correctly measure the Horizontal output transformer "T401" and all its components and then i will give updates about the work. I really tought it could be the IC201 because i had no image at...
  7. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Hey, i found no signals of arcing just heard the tickling noise, the new problem with the vertical was bad contact with the micom microship, as soon as i cleaned it the vertical opened again with no...
  8. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Hello again, after searching awhile i have discovered what might be the problem, and (im 90% sure its "an IC failure"), the big micom microship. I managed to find the right chassis model of the...
  9. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Hello again, managed to test the whole yoke area but not the horizontal circuit, im having 2 problems now, one is cold solder joints somewhere i turn on the screen its all black with backlight, i...
  10. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    I will do is as soon as im able to, thanks for the attention/support^^ :bsdetector: :popcorn:
  11. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    151493

    Only tomorrow i have the capacitance meter with me, i don't trust the tests with the multimeter, should i inspected those marked areas? That blue 2kv ceramic disk capacitor i never thought...
  12. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Brad! i had already tried to mess with the panel it opens but i can't see what im doing the image is all broken :/
    betwixt i will dig in that .pdf today thanks for the quick tips in advance!...
  13. Closed: Re: Help Needed to repair a CRT + pictures and info about the problem.

    Thank you for the quick tips Brad!! I will check everything as soon as im able to in a few hours hopefully finding the culprit :grin:

    - - - Updated - - -

    151468151470151469


    :cry: Can't...
  14. Closed: Help Needed to repair a CRT + pictures and info about the problem.

    Hello, my CRT Monitor from my old retro system currently gave up on me, after i tried to find what the problem was without success, i took the monitor to a specialist to check what the problem was to...
Results 1 to 14 of 16