Type: Posts; User: hyprfrcx

Search: Search took 0.00 seconds.

  1. Replies

    Closed: Proteus TDFN Library

    Somebody has the TDPN and other modern footprints in CAD, for importing into Proteus?
  2. Replies

    Closed: Proteus Lisa Project


    Somebody has a Proteus Lisa Project for building a simple Mixed Analog Digital model?

    Thanks in advance.
  3. Replies

    [SOLVED]Closed: Re: Controlling miltiple power led drivers

    Consider the AVR microcontroller high total current level limits through its outputs, 40mA max per pin, 200mA max overall.

    Which is the current you intend to supply to the LEDs? Perhaps a Power...
  4. Closed: Re: Which Mesh type should I use(tetrahedral or hexahedral)?

    If you are new to FEM analysis, i should suggest you to stick to the tetrahedral meshes, and investigate different methods for mesh refination, putting your attention at increasing the resolution of...
  5. Replies

    Closed: Re: vibration rejection in IMU

    Though originally it is defined as acceleration (m/s2) or as velocity (m/s), It is fine to use the concept for other variables, such as the angle, as you indicated.
  6. Replies

    [SOLVED]Closed: Proteus Arduino EEPROM Simulation

    Hello people,

    Can somebody confirm me if LabCenter Proteus software can simulate the EEPROM registers for the Arduino Atmel megaAVR ATmega328P, for the standard instructions EEPROM.put and...
  7. Closed: Re: What type of power supply should i use for the proteus file?

    Try the Generator Mode>Sine Generator, putting attention in the Delay>Phase parameter, which should be 0, 120 and 240 respectively.

    For the Voltmeters, try the Probe Mode>Voltage, which will give...
  8. Replies

    Closed: Proteus Error in DC Curve Analysis

    The following Proteus model gets the IC-VCE curves for a FMMT415 Avalanche Transistor Model, from a Spice Model found at

    It works fine as is, but fails when changing the second...
  9. Replies

    Closed: Re: Proteus Problem with Analog Simulation

    This 1993 Spice 3f3 Manual in pdf, which i think it is roughly the same than this unofficial online document for the Spice 3f5 Manual in html.
    The 1993 Spice 3f5 is the current Spice version, and...
  10. Replies

    Closed: Proteus Problem with Analog Simulation

    I have a serious problem with Labcenter Electronics, Proteus Professional 8.

    What i need is to simulate nonlinear analog current sources with several variables, mainly, a function...
  11. Replies

    Closed: Proteus EasyHDL Analog Input

    For the EasyHDL language, for Labcenter Electronics Proteus 8.

    I have the exact same question than this closed unanswered post....
  12. [SOLVED]Closed: Re: How can i extract the signal value and time value of response in simulink/matlab?

    What did you need to solve?. Did you already solve it?
  13. Closed: Proteus - Measuring Current through Device

    Dear all,

    In Proteus, it is possible to obtain the current through a component, like in Spice, this is, with a functional call
    R1[i], D1[id], I(R1), or something like that, for i.e. a Transiente...
  14. Closed: Re: Proteus Middle Button Stays Pressed When Panning

    No, hehe, i am not talking about anything sophisticated, just navigating inside a schematic.

    I already configured several Keyboard Mappings, but i am asking if the panning through the middle...
  15. Closed: Re: Proteus Middle Button Stays Pressed When Panning


    I am talking about the Proteus 8.6 Design Suite, LabCenter Electronics software.
  16. Closed: Proteus Middle Button Stays Pressed When Panning

    In the Proteus 8.6 user interface, when pressing the middle button for panning the schematic sheet, the function got frozen, as if the button stays pressed...

    A little annoyance, but it would be...
Results 1 to 16 of 17