Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Suggest a way to improve the performance-simple power supply

Status
Not open for further replies.
M

mayeewa

Junior Member level 1
Joined
Sep 25, 2008
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,381
Simple power supply

Suggest any way to improve the performance of a power supply,for example, how to modify the circuit shown in figure 1 so that it can give a continuous variable of output voltage from 0 and up to its max value.
Thanks for help.
 

Re: Simple power supply

This circuit performs a comparator. When the voltage at the tap of the potentiometer reaches 5+0,6V (the zenner voltage plus the Vbe of T3) T3 conducts and then cuts off T1 and T2. This makes Vo to decrease and then T3 is cut again. In practice the circuit will achieve a stable value in wich Vo assumes a value that makes T3 to slightly conduct. Your whole circuit is a voltage regulator. A large capacitor at the output is needed.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top