Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pic18f4550 usb interface

Status
Not open for further replies.
S

sana khan 01

Junior Member level 2
Joined
Oct 26, 2011
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Islamabad, Pakistan
Activity points
1,418
Hi! im complete the a to d conversion the next step is how to route this binary data to usb .....plz someone helpme
 

explain your project a bit more. Which compiler you are using? MicroC has a built in library for USB HID and also have the HID terminal as well.
 
i m using pic c

---------- Post added at 22:50 ---------- Previous post was at 22:48 ----------

i m using pic c .....also tell me the name of library in micro c and little more detail about it

---------- Post added at 22:53 ---------- Previous post was at 22:50 ----------

im using pic c but tell me the name of library in micro c and little more detail about it
 

I guess you are using MPLAB IDE with C-18 toolsuite.
See these links
https://www.edaboard.com/threads/126795/
**broken link removed**

Now,
MicroC Pro for Pic is a C compiler. It has built in library for USB HID and many other peripherals. Its has a sample routine for pic18f4550 in its help manual. you can see microc library manual in Help.
 

Thanx
im doing project on usb oscilloscope i converted analog signal to digital now i want to sent these digital value to PC using usb host ....after the signal show in gui.

im using ccs compiler plz tell me how i can interface usb with pic18f4550 to send these digital value.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top