Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Film capacitor overheats at 6 Amps rms?

Status
Not open for further replies.
G

grizedale

Advanced Member level 3
Joined
Jun 13, 2011
Messages
838
Helped
17
Reputation
34
Reaction score
17
Trophy points
1,298
Activity points
8,804
Hi,


The following capacitor (1uF, 400V = ECWF4105) has an esr of 1.52 at 84KHz.

the datasheet page 6 tells this..............

CAP DATASHEET
**broken link removed**

Page 7 tells that this cap can handle 6 Amps of ripple current at 84KHz.

....but that would mean this capacitor dissipating 54W of power, which it surely could not possibly do?
 

There's no ESR specification in the datasheet. The impedance curves suggest an ESR (= minimum value of impedance) of several 10 milliohm, which sounds reasonable.
 
Hi,

The middle graph, page 6, RHS, tells us that the dissipation factor for 1uF, 400V at 84KHz......is around 0.8.....meaning 1.3 Ohms esr
 
Last edited:

grizedale said:
Hi,

The middle graph, page 6, RHS, tells us that the dissipation factor for 1uF, 400V at 84KHz......is around 0.8.....meaning 1.3 Ohms esr
Click to expand...
What? Where does it say dissipation factor is 0.8? Maybe you're confusing it with pin diameter?

By my reading of the D graph, it should be around 0.5%.
 
woops. thanks for that, i was forgetting that DF is in %, and the 0.8, is actually 0.008......or 0.005 depending on how the graph is extrapolated.

so esr = DF.XC = 9.47mR ...sounds better......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top