Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HEF4067 multiplexor swing to GND?

Status
Not open for further replies.
UroBoros

UroBoros

Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
I am powering HEF4067 multiplexer with GND and +5V.
Data sheet says says, it's output can swing from GND to +5V (Positive supply)

My question is I need to multiplex signals in the range of 5mv to 4.88Volts.Is there any limitation for this multiplexer to swing to the extremes like offset voltage or rail to rail swing in op amps?

Thanks
 

If your rail-to rail opamp powered at 5V, I think it's possible.
 

Attachments

  • HEF4067-datasheet.pdf
    110.6 KB · Views: 81
Thank you. My opamp is OP07, tied to +12 and -10V. So I suppose 2mv will not be a problem there.
But MUX?

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top