Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

non standart 2.2mm 4 layer pcb manufacturer need in china.

Status
Not open for further replies.
O

orpheus

Junior Member level 3
Joined
Dec 22, 2001
Messages
25
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
178
hello all.

we need 4 layer fr4 pcb board. but with non standarts stack up.

top layer - 35 um copper
prepreg - 0.8 mm
mid layer1 - 35 um copper
core - 0.5 or 0.6 mm
mid layer 2 - 35 um copper
prepreg - 0.8 mm
bottom layer - 35 um copper

so total thickness it about 2.2 mm. most of chinese factories says they cant produce a pcb like this.

also cant we use 2 inner core layer instead of preprgs ( for better dielectric stability)
 

Try checking with PCBFabrication (Printed Circuit Board (PCB) Fabrication - Home Page). I've bought lots of boards from them and they are quite good. They manufacture in China but have a sales office in USA. If by "core" you mean something like Rogers RO4003C or RO4350B in 0.5mm thickness, they offer those materials, although I don't know if they can give you the layer stackup you want. It would have to be a custom quote, you'll need to email them.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top