Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

T290i Pinouts needed for interfacing with PC

Status
Not open for further replies.
I

israr

Newbie level 2
Joined
Oct 2, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???

Thanks
 

israr said:
Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???

Thanks
Click to expand...


Hello visit this Web page
**broken link removed**
 
  • Like
Reactions: israr

    I

    israr

    Points: 2
    Helpful Answer Positive Rating
Thanks for ur reply, T290i is still missing there.
 

Hello isar,
I was just googling for for pinouts myself. In case You didn't find anything of value I would like to share what I found. If You look at page nine You can read pin outs for the connector on handset and it says: pin8=DTMS pin9=DFMF which means rx resp tx lines. Surprisingly, as You I've looked at pinouts.ru, and found other 11pin connectors pin outs. For instant T100 has pin4=DTMS pin5=DFMF according to pinouts.ru. None of these isn't veryfied by myself. Let me know if this info was usable.
**broken link removed**
Have fun /jaa
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top