Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

4mm*4mm Microstrip Filter Design

Status
Not open for further replies.
K

kecbackbencher

Member level 2
Joined
Feb 22, 2008
Messages
45
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
London, United Kingdom, United Kingdom
Activity points
1,531
Hi Every one

I am Struggling for Development of 4mm* 4mm Size Low pass Filter having passband at 2.4G but strong stopband at 4.8 GHz and 7.2 GHz using Microstrip with Substrate thickness 8 mils.

I am using HFSS in this Regard

Any Suggestions

Regards
 

I guess u want to do it in multi layer,..because the size restrictions u have is very small.....

Preferably use LC lowpass filter in multilayer..


Regards
venu
 
thanks fr your response

I am planning to use Defected ground to create miniturization and addtional LC generation with ground discontinuity.. Lumped Element is not acceptable. This is the big issue

Regards
 

Hi,

U can use DGS if ur interested @ higher freq say around 10G.. but not for 2.4G...

Defected ground structure takes more area than using LTCC @ 2.4GHz...

I would say if ur looking @ a size of 4mm * 4mm use LTCC technology ...

U can take a look @ the example..

Thanks
Venu
 
LTCC Technology Fabrication is quiet Difficult

I am thinking in involving step Discontinuity in top layer and Defected ground together.

Also, as thinkedd of substrate is 8 mils... might be it helps in miniturization

what you suggests guyz???
 

hi
i think u doing wrong simulation . can i ask u to send u simulation for my email
 

Hi

since ur having a very strict restriction on size.. u cannot design a filter in 4mm *4mm other than LTCC. But in case if u can relax ur size u can design.
By the way what are other specs are they too stringent..??

---------- Post added at 15:11 ---------- Previous post was at 15:09 ----------

Or buy the LTCC component from minicircuits if u r doing a system design.........
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top