Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help with axial ratio calculation in HFSS

Status
Not open for further replies.
dlock

dlock

Junior Member level 2
Joined
Dec 6, 2010
Messages
23
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,433
I want to plot axial ratio vs frequency in HFSS.The problem is that i do not get what ranges of theta n phi to specify for the plot.The 3d and 2d gain plots for my case are attached.Plz help

View attachment gain plots.rar
 

The file whose link you have mentioned does not open up and
"The requested URL /ftp/.../Antenna-Polarization-14B32.pdf was not found on this server." message is displayed.
The gain plots in the uploaded folder are reattached here in form of images.Plz Help

41_1296996858.jpg
15_1296996858.jpg
33_1296996858.jpg
1_1296996858.jpg
 

Hi dlock,
You can get Axial ratio in HFSS by using these steps
1) Right click on Result -> Create Far Fields Report -> Rectangular Plot
2) In Report:new traces window select Axial Ratio (Availabel in 'Category'), select function such as db,mag, or ang_rad
3) In Primary sweep select Phi, and then select the angle such as 0,90 degree. (refer Screen shot)

Hope this helps you...
 
Thank you for helping me out.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top