Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

LPC2148 sample codes - help needed

Status
Not open for further replies.
S

sumeshrk

Newbie level 3
Joined
Dec 16, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
LPC2148 sample codes

Dear Friends,

I m very new to ARM
and using KEIL UV4 for Programming LPC2148. I like to write the code in C.


Can some one just give me an example program or suggest some links to get some sample codes.

Please help.
 

Re: LPC2148 sample codes

Hi,

You need to learn lpc 2148 first. It's GPIOs and other peripherals. I've already attached sample codes for it previously in this forum, you can get it at following link.



Check it out.

NIKS
 

Re: LPC2148 sample codes

Nikunj Tanna said:
Hi,

You need to learn lpc 2148 first. It's GPIOs and other peripherals. I've already attached sample codes for it previously in this forum, you can get it at following link.



Check it out.

NIKS
Click to expand...

for UART0 no baud rate values are given
please tel me values for baud rate 9600
U0DLL=?
U0DLM=?
U0FDR=?
 
example programs can be found in the keil ARM folder,,,, when you install it......


you can refer any controller in that case as the values and register may not vary tooo much
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top