Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Copy 1 PIC16F72 to another PIC16F72 how ?

Status
Not open for further replies.
K

khossanr

Junior Member level 3
Joined
Jun 22, 2009
Messages
27
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Location
Chittagong,BANGLADESH
Activity points
1,464
Dear friends,
I have a PIC16F72 /PIC16F676 based Inverter kit,want to copy this PIC16F72 /PIC16F676 chip to another PIC16F72/PIC16F676,I have a universal PIC Programmer ( TOP2005+),but no idea how can I use this programmer for that issue.Please help me.

Thanks all.
 
  • Like
Reactions: sstqrm

    S

    sstqrm

    Points: 2
    Helpful Answer Positive Rating
khossanr said:
Dear friends,
I have a PIC16F72 /PIC16F676 based Inverter kit,want to copy this PIC16F72 /PIC16F676 chip to another PIC16F72/PIC16F676,I have a universal PIC Programmer ( TOP2005+),but no idea how can I use this programmer for that issue.Please help me.

Thanks all.
Click to expand...

i am sure, which pic micro ur inv. ,there is code protect is loked.so u con't copy ur inv micro to ur blank micro.
i hope u understand
 

If it is a commercial inverter kit, naturally the code inside the micro would have been locked during programming, and thus cannot be read, and thus cannot be copied too. If it is open, you can read the hex file to a location on your PC, and then re-program any number of fresh devices further.
Cheers
 
It is possible to bypass the code protection (assuming that it exists), but it would likely be cheaper/easier to recreate the code from scratch.
 
  • Like
Reactions: sstqrm

    S

    sstqrm

    Points: 2
    Helpful Answer Positive Rating
Nick C. said:
It is possible to bypass the code protection (assuming that it exists), but it would likely be cheaper/easier to recreate the code from scratch.
Click to expand...

Stealing others hard work is more than stealing others money & valuables.

Some other day, your work will also be stolen.

I request other moderators and Admin to consider stopping this kind of requests..
 
  • Like
Reactions: masud58

    masud58

    masud58

    Points: 2
    Helpful Answer Positive Rating
Its ok if some one is curious to know about locking codes and its possibilities of breaking. The answers will be just "NO" . Any number of answers are welcome in this regard. But Moderators may see that nothing Illegal stuff is shared on the forum.
 

Hi khossanr,
If you are willing, I have technology for complete modified-square wave inverter with ATMEGA16/32 with inverter and triac based charging. Contact me for it but I'm not saying I'll give it for free. Btw, I've develeoped the code myself with mikroBASIC.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top