Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

rs 232 + microcontroller+ nokia device

Status
Not open for further replies.
H

hjahshan

Junior Member level 1
Joined
Oct 16, 2010
Messages
15
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Location
palestine
Activity points
1,388
hi friends
I'm doing a project graduation, and the idea of the project is to send a signal heart to emergancy office "signal of ECG," The idea is that we take the signal from the device of the ECG to the micro controller ,then to the RS-323 , then to the Nokia device which have sim-data-transfer, then the Nokia device send a package of data to the receiving device which is a laptop have sim-data transfer

can u help me how to enter data binary to mobile, or any way to send the esg signal by nokia mobile to lap
plzzz help me
 

pllllllllz help me
 
  • Like
Reactions: ihsen_ing

    I

    ihsen_ing

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Which model you are going to use?
 

can u help me how to enter data binary to mobile, or any way to send the esg signal by nokia mobile to lap
plzzz help me
Click to expand...
there are two ways to do this one is you connect ur ckt to nokia using serial port and use FBUS or MBUS protocol to connect to phone then you can send sms..
or gprs connection.. there are many ways.. to send data using nokia..
 

nikhilele said:
there are two ways to do this one is you connect ur ckt to nokia using serial port and use FBUS or MBUS protocol to connect to phone then you can send sms..
or gprs connection.. there are many ways.. to send data using nokia..
Click to expand...

iam using this connection "gprs connection", but i have alot of problem
i have PIC18F4550 microcontroller connected to GSM/GPRS modem "telit GE865-quad " it's the transmitter unit , used for send at command and data
also i have mobile phone connected to pc "reciever unit " , used for receive data from the GSM/GPRS modem over GPRS
the AT command for my GSM/GPRS modem in links below
https://www.telit.com/module/infopool/download.php?id=542
https://www.telit.com/module/infopool/download.php?id=573
what i need how to establish this connection ??
what is the AT command to be used for this connection ?
thanks for reply
 

This is the same question as in "how to connect 2 gsm/gprs modem?" Why do you duplicate questions?
 

because here the full idea of my project , sorry mr.klystron
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top