Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can't read Link_library file your_library.db

Status
Not open for further replies.
E

etandyjy

Newbie level 1
Joined
Apr 6, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
China
Activity points
1,281
This problem is about design compiler.When i read a verilog file and find a waring.
Compiling this verilog file and the string "Can't read Link_library file your_library.db" come out.
I found that someone also met with this problem ,so who can tell me where to find the Link_library ?
Thank you!

Regards
Zhenghao\]
 

In your .synopsys_dc.setup, the target library and link library files need to be defined. These link_library is nothing but your target library and any memory library or hard coded blocks etc. Look for Synthesis Part1 documentation in Synopsys Solvnet to understand the basics.

Regards,
Samba
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top