Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Universal Microcontroller Programmer

Status
Not open for further replies.
N

naheem84

Newbie level 6
Joined
Mar 1, 2008
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
I am finding circuit diagram +software + pcb of a universal usb microcontroller which works with most of the microcontrollers available.
 

i am finding a universal programmer which works with both most of the series of atmeland pic and and has also a usb interface.
 

naheem84 said:
i am finding a universal programmer which works with both most of the series of atmeland pic and and has also a usb interface.
Click to expand...

I strongly recommend you to use MC manufacturing companies tools if you are a developer. Because most of the programmers other than MC companies will no allow debugging.

If you want a programmer to program boath AVRs and PICs(16 series) ponnyprog200 is free and simple one. But you need a usb to serial cable if you want to use USB.


Good Luck
 

    N

    naheem84

    Points: 2
    Helpful Answer Positive Rating
anandpv2009 said:
naheem84 said:
i am finding a universal programmer which works with both most of the series of atmeland pic and and has also a usb interface.
Click to expand...

I strongly recommend you to use MC manufacturing companies tools if you are a developer. Because most of the programmers other than MC companies will no allow debugging.

If you want a programmer to program boath AVRs and PICs(16 series) ponnyprog200 is free and simple one. But you need a usb to serial cable if you want to use USB.


Good Luck
Click to expand...

I have tried the prolific usb to serial conveteer on my laptop with the JDM programmer. No succes. So I made my own USB programmer with a PIC16F877A ( DKU 5 USB to serial conveter), developed the software in VB.
 

plz share with us, USB to serial convertor for programmers is not a good idea as it does not work or gives bugs.
 

Not all USB to Serial Converters are created equal.
Try to find one whose driver will allow you to change latency.
I have found those based on the FTDO chipset to be of good quality.
 

I have tried 3 usb to serial converters and failed. I havnt heard that any one found successful in using a converter for JDM programmer

Nandhu
 

nandhu015 said:
I have tried 3 usb to serial converters and failed. I havnt heard that any one found successful in using a converter for JDM programmer

Nandhu
Click to expand...

Me too, tried many. But finally I found a working one from a local shop and it works fine for my old serial PIC programmer, Ponnyprog etc.

Result is always success :D
 

search for 'usbasp'. you will get the PCB and software required...

But i think its for AVR micro controllers only...


Anyway its a very good burner... :D
 

You can use PicKit2 as a AVR programmer....
Ref. this link for more.
I tried it with Atmega16,Atmega8635 etc... It works fine for me.

I think it is the lowest price Universal Programmer (PIC,EEPROMs and AVR).

https://pickit2avrisp.wordpress.com/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top