Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Matching network for LNA design

Status
Not open for further replies.

ace_operations

Junior Member level 3
Joined
Jul 15, 2007
Messages
28
Helped
15
Reputation
30
Reaction score
11
Trophy points
1,283
Activity points
1,472
mtee in ads

Hi all,

I am designing an oscillator at 8 GHz using HBTs on a microstrip substrate. I have designed the input and output matching networks in ADS using tlines and the circuit oscillates as expected as shown in the figures. However, when I add the MTEE_ADS component, the oscillation frequency jumps to 5 GHz unexpectedly! I know that there is a junction susceptance at the tee and hence expect some changes. I feel that this change is too drastic!!

Please let me know if anybody finds what I am doing wrong!

Thanks!
 

mtee ads

Hi
As the mtee has physical size (it's a 3.9 by 3.9 mm square shaped patch) you are making your lines longer. Take it into account.
 
Re: MTEE component in ADS

Chinaski said:
Hi
As the mtee has physical size (it's a 3.9 by 3.9 mm square shaped patch) you are making your lines longer. Take it into account.

Agreed, except you missed a 0!. Reduce all line lengths by 1.547 mm (3.094 mm/2).
 

Re: MTEE component in ADS

Thanks! I also have another question regarding the MTEE component. The documentation says that this model is valid only when f(GHz) x height of subs (mm) <= 0.4. Anybody know the reason for this?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top