Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Quarter Wave Transformer Simulation

Status
Not open for further replies.
T

targal

Newbie level 6
Joined
Oct 18, 2006
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,394
quarter wave transformer

Hi.

I am trying to simulate a transmission line which is matched with quarter wave transformer.
I am confused about the simulation program, that is the best for this project.
I could work with Sonnet, HFSS, CST and FEKO. I tried SONNET but SONNET's drawing tool isn't flexible. Do you have any suggestions?
 

transformer simulator

Wouldn't a simple circuit simulator work for you? I.e. Vipec is a free circuit simulator.

Otherwise in FEKO you can draw a few polygons and use variables in the polygon definition i.e. width, or length, etc to play around (use the optimiser) with the dimensions. The substrate can be modeled as a finite or infinite substrate. You could otherwise just "edit" the given Microstrip Filter example in the examples folder.
 

    T

    targal

    Points: 2
    Helpful Answer Positive Rating
quarter-wave transformer

Thanks for your advice.

For a fresh start, Vipec would okay but,

I'm trying to minimize reflection of an object and I want to use binominal or chebyshew approaching for quarter wavelength. So I need a program that I could import images like DXF, IGES etc. In other words, the transmission line that I mentioned is air :)
 

beg simulator 2009

What kind of quarter wave transformer are you trying to simulate? If it is a simple microstrip transformer composed of quarter wave line(s), then I agree with mvr and just about any circuit simulator should work for frequencies below, say, 1 GHz. Above this frequency, you may need to rely on accurate step-junction models which are available with the non-free circuit simulators (like Agilent ADS, AWR MWO, etc.). At even higher frequencies, or when the geometry is not very straightforward, you should probably use an EM simulator (like momentum or sonnet). If you are not talking about a microstrip solution, then please give more details.

targal said:
... I tried SONNET but SONNET's drawing tool isn't flexible.
Click to expand...
What do you mean by "flexible"?
Are you using sonnet lite or the pro version?
 

    T

    targal

    Points: 2
    Helpful Answer Positive Rating
quarterwave transformer

I am trying to make objects invisible to common radar frequencies , above 1GHz actually and want to cover the object with a layer that is quarter wave long. I haven't thought about what kind of object I'm goingt to work, maybe a cruiser. So a microstrip transformer wouldn't useful.


Joe_User said:
targal said:
... I tried SONNET but SONNET's drawing tool isn't flexible.
Click to expand...
What do you mean by "flexible"?
Are you using sonnet lite or the pro version?
Click to expand...

I mean, SONNET is good for designing antennas, couplers and mw circuits, but its drawing tool isn't enough for 3D designs. I'm using pro version of SONNET. Actually I haven't full knowledge about the simulation programs, beg your pardon:)
 

quarter wave transformer cst example

i guess ADS could be a good option,.
 
quarter wave transformer junction step model

Agree! ADS~
 

wave simulator

I don't know anything about that program actually, I'm still trying FEKO. For 3GHz, it's simulating very slow.
 

quarter wave transformer junction step model

ADS is the best
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top