Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SIM300 breakout PCB design - let's fab some PCBs :)

Status
Not open for further replies.
sim300 layout

hello, this is Linda from Shenzhen Samway Electronics Co., Ltd., we are a professional PCBs manufacturer in China, if you are interested in our products, please contact me. Thanks. My email address is : linda@samway.net.cn
 

    V

    Points: 2
    Helpful Answer Positive Rating
sim300.pcb

gemni7 said:
I have same SIM300.
I am going to develop my own board so that I can use it, I've got it cheaper than you. I also have RF connector with cable and antenna for $4.00 only and it works fine. SIM Jacket cost me $ 2.00 not bad. hopefully I will be able to develop my own board in next week. What documents & help files you have gotten from SIM.com?? \]

Any news on that project? The hi-cloud boards are way overpriced. The module itself is half what they sell a PCB with few cheap components and connectors

If you have gurbers post them please so we can order our own boards from our favorite fab house for cheap!

B
 

sim300.ddb

sabeti_1990 said:
does anybody design a pcb for Sim300cz
thx

yes, but it's not a breakout PCB. It is a remote monitoring unit with analog and digital I/O operating from ac wall adapter and has a Li-ion battery backup with automatic charger.

EJ
 

simcom & sim300& max232

sabeti_1990 said:
does anybody design a pcb for Sim300cz
thx

Hi, we are providing officially SIM300CZ module EVB kit made by SIMCOM. If anybody want the quotation please feel free to contact me via:keith3000(at)163.com, thanks.
 

orcad pcb footprint for sim300 connector

Some DID design PCB for SIM300 module. Here is his site and gerber files:

**broken link removed**

Silix said:
I found a good web site with a working sample project :
http://www.utoolkit.com/gsm/

Silix,

This is really a good work man! Thanks for posting those gerbers. Now we will get some boards fabbed real cheap!

Thanks

**broken link removed**
 

sim300_v7.02

hi every one
It's a pcb of sim300c + atmega64 that I make it. it works good
hope it's useful
if U want another tell me
be success

 
smf05c sim300

sabeti that is nice one,
I have some code for the AVR based module. attached here

further sabeti do you have code based on ATmega, for GPRS,
Thanks for the post.
 
sim300 board

Another application. This I got from web

Harshal Doshi,
POTENT
INDIA
09429071421
 
sim300 evb gerber files

do anyone has hardware based on SIM300 not sim300c
 

sim300cz eval board

I'm looking sim300 pcb plate file...seems that smiliar like EVB from simcom.
The connector smaller that sim300CZ.

Huys
 
  • Like
Reactions: supis

    supis

    Points: 2
    Helpful Answer Positive Rating
init sim300

hi potents
want do U want about gprs command ? where is your problem for it ?

Added after 1 hours 19 minutes:

hi
it's for sim300 :D

 
  • Like
Reactions: zeilja

    zeilja

    Points: 2
    Helpful Answer Positive Rating
eagle lib sim300

Hi sabeti_1990

Would you be so kind and add your schematic - atmega64+sim300c ???

Regards
MAR_c_i_n
 

sim300c pinout

hi MAR_c_i_n
I just use sim300 standard datasheet the pin out can be founded in it (that i let it up) for pin out of mega64 U have not any problem it's very simple

hi sarajevo it's protel 2.7 & file opened in any version of protel o U want it??

Added after 1 minutes:

I mean p.r.o.t.e.l
 

simcom eagle library

hi potents

what language of programing do U use
 

eagle lm393.lbr

Thank MAR_c_i_n
my problem is UART sms sender PIC16F628+ SIM300
Mesa
 

sim300 design

I just found the homemade antenna for dual band GSM.
But didn't have dimention of antenna and value of the track.

32_1229403640.jpg


Very great for out SIM300
Huys
 

    V

    Points: 2
    Helpful Answer Positive Rating
sim300cz eagle

Hi,
Is it possible to be connected a gsm modem with sim300 module to PC using max232?
 

eagle sim300

hi,
i'm searching a layout oder library with sim300 molex connector. could someone help me ?
 

pcb breakout board

hi semelak1

the schematic of up pcb is based on sim300c hardware (PDF)
& u should connect first uart of sim300 t a microcontroler & control switch of power by a npn transistor & other that is based on your need to add to your microcontroler
 

sim300 battery charger

Hi,

I have attached a zip file with a SIM300.lbr file for Eagle.
Consisting of both symbol and package.

Håkon
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top