Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADS error: can't get item definition for TSMC_CM018RF_NMOS_RF

Status
Not open for further replies.
S

sundarmeenakshi

Full Member level 3
Joined
Dec 12, 2006
Messages
188
Helped
19
Reputation
38
Reaction score
2
Trophy points
1,298
Activity points
2,258
when i am simulating the circuit“ lecture1_intro.dsn i am getting this error
can't get item definition for TSMC_CM018RF_NMOS_RF.
how can i rectify this problem
 

ADS error

This is related to PDK. Place a PDK library component in the design.
 
Re: ADS error

kspalla said:
This is related to PDK. Place a PDK library component in the design.
Click to expand...
i am not getting how to include this Packaged Design Kit can u explain in detail manner
 

ADS error

I gone through the document.
PDK is process Design Kit which is TSMC RF CMOS 0.18um in this case.
When you install a PDK a palet will be created in your schematic.
Go to this palet and select the component that you interest in simulation.
These components will have wither 1 or 3 or multiple pins based on the ports avalable.
These components can not be simulated unless the model is available for the simulator.
The PDK developer will use all the models in a library and is available in a component. this component will have no ports.
Place the component namely "TSMC RF CMOS 0.18um" from the palet and try. I am sure that this time it will simulate.
 
Re: ADS error

kspalla said:
I gone through the document.
PDK is process Design Kit which is TSMC RF CMOS 0.18um in this case.
When you install a PDK a palet will be created in your schematic.
Go to this palet and select the component that you interest in simulation.
These components will have wither 1 or 3 or multiple pins based on the ports avalable.
These components can not be simulated unless the model is available for the simulator.
The PDK developer will use all the models in a library and is available in a component. this component will have no ports.
Place the component namely "TSMC RF CMOS 0.18um" from the palet and try. I am sure that this time it will simulate.
Click to expand...
When you install a PDK a palet .
it is available with ADS software itself. otherwise we have to install somthing extra?
it is extra component where from i will get this one.
 
Re: ADS error

t is available with ADS software itself. otherwise we have to install something extra?
Click to expand...

This is PDK only. I mean there is no process model like "TSMC RF CMOS 0.18um" by default.
You can check it by this procedure given below.
Go to main of ADS project containing the drop down menu namely design kit.
Go to list design kit.
You will find the PDK here if it is not found means you need to install this PDK.
 
Re: ADS error

kspalla said:
t is available with ADS software itself. otherwise we have to install something extra?
Click to expand...

This is PDK only. I mean there is no process model like "TSMC RF CMOS 0.18um" by default.
You can check it by this procedure given below.
Go to main of ADS project containing the drop down menu namely design kit.
Go to list design kit.
You will find the PDK here if it is not found means you need to install this PDK.
Click to expand...
yes i got it when i am installing it is asking some zip file where from i will get this one
 

ADS error

Your company will have this package if they already signed NDA. In general to get any PDK your company should sign NDA and other formalities with the process vendor.
Just ask your senior member who can better help you.
 

Re: ads error

hi
i am working on design of mixer.. i am in need of the TSMC_CM018RF_NMOS_RF transistor.. could anyone plz post the zip files for the PDK :"TSMC RF CMOS 0.18um"
 

Re: ADS error

can anyone suggest some idea to clear this error in ads for tsmc rf cmos 0.18um transistor... have attached my design and the error i got...
 

Attachments

  • single mixer.bmp
    3 MB · Views: 111
  • error.bmp
    3 MB · Views: 109

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top