Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Rules by Area in Altium

Status
Not open for further replies.
A

Anonymous_Ricky

Advanced Member level 2
Joined
Dec 26, 2006
Messages
516
Helped
88
Reputation
178
Reaction score
58
Trophy points
1,308
Location
India
Activity points
3,974
Hi all,
I need to know how I could define the rules by area so that track width and other routing constraints are automatically changed as I move into or out of a particular area in tha board (say for a BGA we have a routing width of 5 mil and for rest of board we have routinh width as 8 mil, how it could be done automatically in Altium).

Thanks in advnace.
Ricky
 

InRegionRelative(X1,Y1,X2,Y2) or InRegionAbsolute(X1,Y1,X2,Y2) can be used to define a region for a specific rule. You'll find an explanation of those queries starting on page 144 in the latest version of "TR0110 Query Language Reference.pdf".

You could also use a Room, and then use something like "WithinRoom(RoomName)", or "TouchesRoom(RoomName)".
 
Rules by Area in @ltium

Thanks HC,

now I am able to that.
One more help i need from you is there any document from where i could get to know these commands such as Within roomand touches room etc.

Ricky

sorry you have alredy mentioned the document I will go through it and thanks once again.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top