Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What's the meaning of die package and hermetic module?

Status
Not open for further replies.
W

winglj

Full Member level 4
Joined
Feb 21, 2005
Messages
195
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,063
Hi, I have a simple question about the semiconductor device's package. What's the meaning of die package? Is it different from the chip?

And what is the hermetic module? Does it enclosure by some packages also?

Thanks
 

Re: die package?

winglj said:
Hi, I have a simple question about the semiconductor device's package. What's the meaning of die package? Is it different from the chip?

And what is the hermetic module? Does it enclosure by some packages also?

Thanks
Click to expand...

Die is chip, but it can't be used directly, because the pins are very small and it is a plate. So it need to be packaged.
Usually, what you see of a chip is the die after packaged.
Besides, package can protect the die.
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
die package?

Thanks, jecyhale. So how can I use the device as "die"? If it cannot be mounted on PCB, how can we use it? Thanks.
 

Re: die package?

winglj said:
Thanks, jecyhale. So how can I use the device as "die"? If it cannot be mounted on PCB, how can we use it? Thanks.
Click to expand...

Do you have use some chips on you PCB?
If not, you can open you handphone and you will find some black box which are the chips after packaged.
They have some pins like needles which can sealed on PCB.

So any chip can be used on PCBafter package.
And any chip must be packaged before used.
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
Re: die package?

yes, in some cases, especially sensitive to cost , die is directly mounted on the pcb.
after bond all pads of die to pcb pad, the die will be cover with glue ( actually , I don't know how to describe this, since it is one kind of black glue) and then, the whole pcb will be placed to be heated (about 40min or so)
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
Re: die package?

I believe it is special epoxy that have temperature expansion coefficient about the same as the board material to prevent cracking.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top