Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to simulate a LED-circuit

Status
Not open for further replies.
J

jiangfuchun

Newbie level 5
Joined
Nov 9, 2007
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,335
how to simulate a led

In a pump charge circuit,how to simulate the current through the LEDs according to the voltage between the LEDs?
 

led circuitsimulate

you need a LED model, search this board , there is a LED model
 
thank you!
how can i find the LED model in this board?
I found nothing about LED model in this board!
please tell me how to do!
 

the following is a simple simulaiton model for WLED

.SUBCKT LED P N
R1I10 NI P 1G
C1I3 P NI 10P
R1I4 N NI 0.005
G1I5 P NI VALUE=' 1.261E-17*(EXP(V(P,NI)/(0.025*4.15))-1)'
.ENDS
 

HI,Btrend:
maybe the macro model for WLED have something wrong,because the current through it is too large when the voltage accross the LED is about 0-4V.

thank you!
 

u need to add a current limiting resistor ~ 10 ohm.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top