Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS Lumped Port Error ! Can anyone help me ?

Status
Not open for further replies.
G

gerilla

Newbie level 4
Joined
May 8, 2008
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,345
When I clicked to anlyze, I got this error. Can anyone help me ? I attached the project file.
Project3 (C:/Documents and Settings/nerdem/Desktop/filter2/)
HFSSDesign2
[error] Port refinement, process abc3d: Port LumpPort1 with terminals will not support terminal mode(s). Most likely causes are: Incorrect boundary setup. Incorrect face/object selected for port. Port object drawn in the incorrect location. Incorrect object material assignment. (11:04 May 19, 2008)
[error] Simulation completed with execution error on server: Local Machine. (11:04 May 19, 2008)
 

There were some things wrong with your design. I've changed your model a little bit. Take a look at the file. for explanation please take a look at the HFSS tutorials. It is better to follow the tutorial first, since it explains ins and outs of the designs systematically.

Regards,
Shameem
 

    G

    gerilla

    Points: 2
    Helpful Answer Positive Rating
lumped ports usually made inside geometry
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top