arefeidi
Member level 4
Hi,
I'm currently designing a 868 MHz-circuit and my 50 ohms microstrip line is too bold to directly connect it to the input pin of an IC. I only have a 0.8mm FR4 board and unfortunately can't use another one.
Can I do something like I've drawn in the attached graphic or do I get too much reflections by doing that?
The width of the microstrip line is about 1.5mm, the width of the IC pin about 0.5mm. I've checked several books (Pozar, etc.) but couldn't find anything of help there.
Thanks alot in advance!
arefeidi
I'm currently designing a 868 MHz-circuit and my 50 ohms microstrip line is too bold to directly connect it to the input pin of an IC. I only have a 0.8mm FR4 board and unfortunately can't use another one.
Can I do something like I've drawn in the attached graphic or do I get too much reflections by doing that?
The width of the microstrip line is about 1.5mm, the width of the IC pin about 0.5mm. I've checked several books (Pozar, etc.) but couldn't find anything of help there.
Thanks alot in advance!
arefeidi