Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to burn .hex to microcontroller with usb port

Status
Not open for further replies.
M

maggots

Member level 4
Joined
Apr 4, 2007
Messages
75
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,740
microcontroller hex download with com port

Hi...

plis help me i want to burn .hex to uC but all i have in my laptop is usb port...

what software and interface that i should have...??

thx a lot
 

most popular cb0703 combination

Hello.

You can use a usb programmer.
What is the uC????

For microchip you have this one, i build it , and its very good.
**broken link removed**.
I build the brenner 8p.
Sorry but the site is in german, but any doubt, post here.
 

sprut 8p pic programmer

which micrcontoller are u using
 

usb brenner 8p i english

i am sorry..for only give a little information...

i use avr especially atmega...
i am usually use code vision avr..
some times winavr....

thx for attention guys...
 

ports which burn hex code in laptop

take a usb to serial converter
 

hex de usb burn

The USBasp is easy to use. and u can do it your self easily.
 

Re: most popular cb0703 combination

Eraser said:
Hello.

You can use a usb programmer.
What is the uC????

For microchip you have this one, i build it , and its very good.
**broken link removed**.
I build the brenner 8p.suf
Sorry but the site is in german, but any doubt, post ing here.
Click to expand...



sorry for interrupting so late but sir i want your help


i have a project in i am using At mega 2560. in which the avr should for burning the program and co communicate with computer also i want to use usb to communication and burning the program. while surfing i foud that i can use some AT Mega 8 or some other AVR and all. But sir is it Possible that with out using the other AVR we can do this???
if its not possible from where i can get the program of the other AVR?


please help waiting for your valuable time
Mohammed Ismail
 

Re: most popular cb0703 combination

ismbn said:
sorry for interrupting so late but sir i want your help


i have a project in i am using At mega 2560. in which the avr should for burning the program and co communicate with computer also i want to use usb to communication and burning the program. while surfing i foud that i can use some AT Mega 8 or some other AVR and all. But sir is it Possible that with out using the other AVR we can do this???
if its not possible from where i can get the program of the other AVR?


please help waiting for your valuable time
Mohammed Ismail
Click to expand...



Get a USB- Serial Converter. and also u have to take care of the TTL and CMOS logic, so on a General purpose board, get a MAX232 IC mounted ( Rx and Tx are connected to Tx and Rx of MCU). So, Connect a USB to SERIAL converter wire to that general purpose board and that board with your MCU. Now, use a simple utility like FlashMagic, and download hex file to MCU using serial port.
 
  • Like
Reactions: ismbn

    ismbn

    ismbn

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top