Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how can instantiate the cores(edn)generated by chipsccope..

Status
Not open for further replies.
K

kvingle

Full Member level 5
Joined
Nov 5, 2007
Messages
244
Helped
33
Reputation
66
Reaction score
12
Trophy points
1,298
Location
India.
Activity points
2,574
Hello all....
i am trying to use chipscope vio core.I've generated edn cores for icon and vio ips
but i am not being able to insert them into my design. i have instatiated the icon and vio core in the top level of my design. whenever i try to synthesize i get ? on icon and vio cores instance .I tried to add two edns in project but the ISE does not support intake of two edn file. I learned that i will have to copy the edn files into ISE project dir.I did so...but that too proved no help....
anybody help...:?:
 

Re: how can instantiate the cores(edn)generated by chipsccop

? is ok .

also add blackbox attributes :

example :

attribute box_type of chipscope_vio_tgen : component is "black_box";
attribute box_type of chipscope_ila_4 : component is "black_box";
attribute box_type of icon : component is "black_box";
attribute box_type of chipscope_ila_dataout : component is "black_box";
 

Re: how can instantiate the cores(edn)generated by chipsccop

where....in my top module? or somewhere else?
and will i have to copy the edn files or add them directly into project?Sorry if i sound dumb .but i never worked with edn files..
 

Re: how can instantiate the cores(edn)generated by chipsccop

the edn files should be under your project folder.

put the attributes just before the begin statement .
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top