Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make a programmer for atmega8/89cxx programming?

Status
Not open for further replies.
H

halee awan

Full Member level 3
Joined
Apr 8, 2006
Messages
151
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Activity points
2,207
atmega8/89cxx programmer

hi to every one
i want to make a programmer that is capable to programe 89cxx and atmega8
is there such type of programmer or any one who have made such type of programmer plz help me
and plz see it
**broken link removed**
is it best one or not ,need experts opinnion about this okkkkkkkkkkk
 

Re: atmega8/89cxx programmer

I made it. It was so long...

It works perfect.

Try it out

ask me if you have any trouble .

Regards
Nandhu
 

Re: atmega8/89cxx programmer

asim khan isp programmer !
 

    H

    halee awan

    Points: 2
    Helpful Answer Positive Rating
Re: atmega8/89cxx programmer

manish12 said:
asim khan isp programmer !
Click to expand...
you r ignoring some thing that have been asked ,me till waiting
 

Re: atmega8/89cxx programmer

hi..
i am not the expert but i would like to try to reply as per my knowledge.

if you want both MCU in same programmer then for such programmer you need to put another slot in the 89XXX programmer and buffer IC too.

because ATmega8 is 28-pin MCU, and 89XXX series has 40-pin MCUs.

by the way, please check these links may be it can help you....

-->> **broken link removed**

-->> http://www.serasidis.gr/circuits/avr_isp/avr_isp.htm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top