Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ethernet controller interface with microcontroller

Status
Not open for further replies.

abdiyora

Junior Member level 1
Joined
Jan 21, 2008
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,389
ethernet controller interface

Hello Sir,
I want to interface Ethernet controller with microcontroller. I see some Ethernet controller in which SPI interface there. I have doubt, Is there different microcontroller have different Ethernet controller. Currently I have 89s52 microcontroller.
Can you suggest me which Ethernet controller is useful for me ?..

Thanking you...

With Regards,
Ankur
 

microcontroller interface ethernet controller

You can use ENC28j60 from Microchip

Cristi
 

wiz5100 datasheet

Is that possible to build an ethernet interface on a 8-bit mcu?
 

    abdiyora

    Points: 2
    Helpful Answer Positive Rating
w5100 chennai

I advice to you microchips mcu with ethernet controller. Microchip supplies a TCP/IP stack for free for that controller as well
 

    abdiyora

    Points: 2
    Helpful Answer Positive Rating
wiz5100 ethernet

atmaca said:
I advice to you microchips mcu with ethernet controller. Microchip supplies a TCP/IP stack for free for that controller as well

Hello atmaca,
Thanks for reply & suggestion.But i still confused. Can you please tell me why i use microchip instead of 89s52 ?.. and why not use 89s52 ?..
Can you please send me any useful link for practical understanding...

Thank you for help me...
 

silabs microcontroller dealer

hi,

if you ae fond of 8051 u can choose controller from silabs. they also have a ethernet controller and they provide a TCP/IP stack compatible with their microcontroller.visit the web link given below for more info


www.silabs.com
 

india microcontroller ethernet

rajeshkumar123 said:
hi,

if you ae fond of 8051 u can choose controller from silabs. they also have a ethernet controller and they provide a TCP/IP stack compatible with their microcontroller.visit the web link given below for more info


www.silabs.com

Hello rajeshkumar,
I see link but in which some development kit & some ethernet controller IC give. Is it available in india or not ?
I want to use microcontroller 89s52.

Thank you for help me...
 

8051 ethernet controller

There is very hard to get hte ethernet controller IC since you are not a representative from a big company.

So, I still advice you to take other's member's suggestions. Use another type of MCU with built in Ethernet (Zilog, Microchip and ......)

If you are new comer in this field, visit www.edtp.com
 

wiznet ethernet chennai

Hi,

You have a development kit available from silabs. I have bought the same ethernet kit for my educational use from silabs dealer in India. Read the book(link given below) on TCP/IP implementation on embedded device. Dont stick to AT89S52.
Initially in my college days i used the same AT89S52 . Silabs is much better than AT89S52 with lots of memory & pheripheral. It is also widely in the industry.



With Regards
S.Rajesh Kumar
 

    abdiyora

    Points: 2
    Helpful Answer Positive Rating
Hi rajeshkumar,
Can you please tell me which ethernet kit you bough and what prize ?..
Link which you give, ,
is currently not open...

Thank you for help me..
 

hi,

the ethernet kit i bought from a local representative. It cost me around Rs.14000/-

The mouser pric is 120$ excluding shipping

https://www.silabs.com/tgwWebApp/public/web_content/products/Microcontrollers/en/EthernetDK.htm

Can u get me more details such as ur mail id & which city do u live in so that i can mail u on whom to contact .

try reading this ethernet design guide

https://www.silabs.com/tgwWebApp/public/web_content/products/Microcontrollers/en/EthernetDK.htm

with regards
s.rajesh kumar
 

Hi, rajeshkumar
It is too costly.I want to make ethernet controller for microcontroller.
If possible then give me the practical information related to this...

Thank you for help me...
 

Some time ago I've found an interesting project at
**broken link removed**
If there are somebody trying to modify it?
The author seems to be busy with something else...
 

Hi,
I see another atmel ic atmega88 or atmega168 which is used with ethernet controller ENC28J60.but here atmega 88/168 is not available.Instead of that atmega8 is available.I see both datasheet but not too much difference i find.
Can i used it for my application ?..

Thank you....
 

hi,

U can choose any controller but before choosing the controller please verify that u have enough support in terms of TCP/IP stack for the controller u use. You can build your own stack but it is not easy.

With Regards
S.Rajesh Kumar
 

Hi,
Can I use microchip Ethernet controller ENC20J60 only with microchip microcontroller like PIC18F4620, etc or other microcontroller like Atmega88, 128, etc. ?..
Same as for, Atmel Ethernet controller CS8900 use only withAtmel microcontroller or other microcontroller....
What will be suitable for me ?.. Why ?..

Thank you...
 

Hi,
Is there any programmer required for ethernet controller IC ?..

Thank you for help me...
 

Hello Ankur,

the ENC28J60 requires additional software, the said IP stack, but no programmer. The software may me a reason, why the device isn't suited for your application, e. g. due to limited code space. I want to suggest a different chip: W5100 from Wiznet. www.wiznet.co.kr

This is an ethernet controller with embedded TCP/IP stack as known e. g. from GSM GPRS modems, including many functions you would need to implement in your software otherwise. It also has some restrictions, but most likely they don't count for your application. They also have good example applications.

I know, that Wiznet is represented in India, see Where to Buy on their homepage. There are also preceeding chips from Wiznet, but W5100 is probably best for new designs, a single-chip solution, offering different interfaces.

Regards,
Frank
 

Hi,
I get IC ENC28J60.But i still not get 89S8252.
Can you please tell me at which in india i get this 89S8252 ic ?..

Thank you for help me..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top