Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Load transient operating point

Status
Not open for further replies.
A

avt

Member level 5
Joined
Apr 25, 2005
Messages
86
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,981
Hi,

I have run a transient simulation for a selfbiasing circuit in order to let it swing into the "normal" operating points. The (transient) operating points are saved at the last time step.

Now I would like to use these saved operating point information for the initialization of another transient simulation (with transient noise - transient noise during the former transient simulation would result in very long simulation times).
My question is now - how can I tell spectre to use the operating point information from the former simulation ?
 

In options of transient analisys fill "infotimes" field with time points separated by space. Than annotate transient operation point for selected time.
Enjoy.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top