Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ie3d antenna design for beginners

Status
Not open for further replies.

cisconur

Member level 1
Joined
Nov 14, 2007
Messages
33
Helped
15
Reputation
30
Reaction score
15
Trophy points
1,288
Activity points
1,452
I found that pdf document i am new at ie3d and i am trying to find out what i can do with it and i am sharing, what i find, with u ; i hope it can help.
 

ie3d antenna

This Presentation just gives an general idea about the feature and application of IE3D for Antennas.But for step by step procedure U've to read IE3D manual which is well explained in an detailed manner.

Go thr Chapter 1 to 5 of the IE3D manual for Antennas.
 

    cisconur

    Points: 2
    Helpful Answer Positive Rating
ie3d 14 manual

ok i am going to read that thx alot helped :)
 

example design antenna by using ie3d

I also go to read it soon
before IE3D i used Sonnet Software
Is it similar to IE3D?
Can somebody answer?
 

ie3d for antennas

Thanks very much
 

ie3d antenna design

well IE3D manual is as good as this one as far as I can think. It is not well written.

My experience is that IE3D is only good for planar structures with infinite ground plane. I have simulated some slot antennas using IE3D. They came very well and the speed was impressive. For finite ground plane it is not at all good.
 

presentation on ie3d

thanks for your share
 

Hi cisconur

there's a lot of examples in the directory of instalation just look at them. antennas
filters and more.

pl
 

there's a lot of examples in the directory of instalation just look at them. antennas
filters and more.

i don't find them
 

hi ALL?
I think that for a good utilisation of IE3D you have to read the manual, it is very good and contains all details,
I know that it is boring to read all chapters but you have an index and a table of content that will help you to choose just what you need, to learn.
but the lecture of the chapter 1-3 is important to take the basics.


There is also some movies on the web site of zeland www.zeland.com.
it is very pedagogic and helpfull.

good luck.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top