Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Optical transceiver and paramete Data Rate (NRZ)

Status
Not open for further replies.
kkdelabaca

kkdelabaca

Full Member level 2
Joined
Apr 18, 2003
Messages
140
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,105
data rate nrz

Hello to everybody,

I need use one optical transceiver to make one communication between 2 points situed at 12km of distance.

The comunication is RS422 at 400kbps or less. Looking for information about the optical transceivers, I see that appears one paramenter: Data Rate (NRZ) at 622Mb/s. What does? It means that I need to continuously transmit?
These will comunicate correctly at 1200 baud?

Thanks!
 

Hi,
Data Rate (NRZ) This is a Non Return to Zero encoded data.
at 622Mb/s
622Mb/s = 622 000 000 baud
So the communication at 1200 baud is possible.

For 12 Km you must check whether repeater are needed or not.
 

    kkdelabaca

    kkdelabaca

    Points: 2
    Helpful Answer Positive Rating
Thanks master_picengineer,

for 12km in singlemode is not a problem :)
If the Output is NRZ, I need ue one differential amplifier for obtain the data in TTL or CMOS?

Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top