Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with designing patch antenna edge feeding condition

Status
Not open for further replies.
V

v_vishal

Newbie level 4
Joined
Sep 20, 2007
Messages
5
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,281
Activity points
1,306
Hi all,

I have proble to desing the patch antenna edge feeding condition is that feed element is at the edge and microstrip radiator is at the it is Square patch.

so i want some starting step and basic equation for the transmission line model
 

patch antenna

hi vishal

First design the antenna for width and length and take size of antenna L * L.

for finding the feed point
1. draw equivalent circuit for the antenna for TLM
2. find the characteristic impedance of transmission line.
3.find point x where you feed the element by radiation resistance.
4. find the width of feed element.

if you have further query then write on my email so i send some basic tutorial on it it you want...!
 

    V

    v_vishal

    Points: 2
    Helpful Answer Positive Rating
patch antenna

you can go through the book microstrip antenna design handbook and microstrip antenna handbook for the design the antenna by the trasmission line theory.
 

    V

    v_vishal

    Points: 2
    Helpful Answer Positive Rating
patch antenna

https://emtalk.com/mwt_mpa.htm

* W: 41.08 mm
* L: 41.08 mm
* lqw: 24.05 mm
* wqw: 0.72 mm
* l50: 15.00 mm
* w50: 4.84 mm

go through this site for this parameter and you can find the very good desing on patch antenna
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top