Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Idea for osciloscope with PIC

Status
Not open for further replies.
pic adc memory

Where can I get CPLD's source?
 

lcd scope using pic18f452

Oscilloscope using PIC16C65
 

osciloscope projects

You can also look at my work.
**broken link removed**
 

download parallel port vi pablin

Thank you guys for all the responses, I had so many problems with interference in the input stage at high frequencies... I was really getting close to something workable when I found an old used 20 Mhz Scope for les than 100 usd, I just went ahead and bought it. My scope project never really woked that well at frequencies over 1Mhz but anyway I lerned a lot of programming and design in the process.
 

oscilloscope pic

Hai All

Very interest posting,I'm looking the project scope right now.

http://biphome.spray.se/frl_linder/PIC_scope.htm--->can we changes the LCD with Nokia LCD??

http://bitscope.com--->the CPLD source

Thank's
Huys
 

osciloscope program

i use DM642 to build a osciloscope, 7"TFT display
 
  • Like
Reactions: aduri

    A

    aduri

    Points: 2
    Helpful Answer Positive Rating
pic grafhic l.c.d scope

hello i build scope with 18f4550 from this link and work
**broken link removed**
 

picscope nokia

>http://biphome.spray.se/frl_linder/PIC_scope.htm--->can we changes the LCD with Nokia LCD??
The chips used in the display are: ks0108 + ks0107
So if your Nokia LCD has compatible chips, it will work.
 

transfer external adc pic

would you please to send me eagle sch,brd file of course if you have, and where to buy mcp6s26,
also i have lcd 128x64 with ks0108+ks0107 from picture above.
Regards.
 

osciloscope with pic

MCP6S26 is an 32kB EEPROM with SPI-interface. You can use an EEPROM from an
other chipmaker. The memory is just for svaving and viewing saved samplings.
So, it is not necessary to use one.
But if you have one, you can transfer the data to my (expremental ver.)boottalker and then view the waves on the computer screen. I could mail you this version.

About the Eagle files, I don't give them away, sorry.
 

lcdscope

Spectrum Monitor
sqr1.jpeg

saw.jpeg

sinx.jpeg


http://elm-chan.org/works/akilcd/report_e.html

Watch this amazing video:
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top