Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help on HFSS simulation for horn antenna.

Status
Not open for further replies.
J

John_li

Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,945
Hi all,
I am a beginner,and the first time to simulate antenna.I met a problem,indicated Warning - Boundary 'Rad1', Boundary 'WavePort1' : Boundaries overlap. Attached as bellow.
Anybody can help me?
Thank you in advanced.
 

Your boundaries overlap and the port will take precedence. The problem should run just fine. The warning is just that, suggesting you look at the overlap in case it resulted from an error.

I expect that your port is somewhere in the middle of RAD1 boundary.

(I didn't open your model to make sure this is the problem. Look the boundaries over to see if they are as you intended and try to solve the model.)
 
I used HFSS 9.0 simulate.and attached the document FYI.And the above attached file can be opened with Winrar.
 

John_li said:
Hi all,
I am a beginner,and the first time to simulate antenna.I met a problem,indicated Warning - Boundary 'Rad1', Boundary 'WavePort1' : Boundaries overlap. Attached as bellow.
Anybody can help me?
Thank you in advanced.
Click to expand...
You can look at the Attachment file. This's an example of horn-simulation.
 
  • Like
Reactions: ferdows

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
    F

    ferdows

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top