Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADS momentum problem with shifted response

Status
Not open for further replies.
Y

Yahia Muhammad

Member level 5
Joined
Mar 30, 2006
Messages
86
Helped
11
Reputation
22
Reaction score
6
Trophy points
1,288
Activity points
1,671
i designed a hairpin filter with center frequency of 2.14 GHZ and bandwidth 60 MHZ
the circuit simulation gave the correct results making the momentum simulation the response was shifted upwards to 2.24 GHZ i don't know why

how can i solve this problem ??
 

ADS momentum problem

change the mesh density
 
Re: ADS momentum problem

Generally speaking, you will very rarely get a direct translation of a result in Circuit simulation in an EM simulation.
You might have to tweak the EM thing a little bit, like reducing, length, width to get it at the exact point you need..
 
ADS momentum problem

always the circuit models ,will give a shift , coz it is approximate models , but momentum more accurate ,which include the coupling between lines and so on

so u need to optimize the lines in momentum

khouly
 
Re: ADS momentum problem

Also, like psmon suggested, you could try playing with the mesh density to see if it makes a difference..
 
Re: ADS momentum problem

Dear all i want to thank everyone answered you were really helpful :D
the solution was combination from replanning the mesh and post optimization
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top