Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB driven PIC programmer

Status
Not open for further replies.
G

gusagar

Newbie level 6
Joined
Mar 23, 2007
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
Today I was at a local elec parts and saw an ATMEL-PIC USB driven (it takes +b from the USB port) programmer. The programmer is made in Argentina and costs about 150 US$.

Have any of you an idea where to find something like that to be home-built?

Here is the WEB site from this guys

mstools.com.ar

Thanks so much
 

do you know the list of supported device? I think the list was not complete because it only show 18 series device only.

:D

Added after 10 minutes:

If you want you can try gtp usb programmer the lite is free just try to search for it here.

Or you can build DIY KIT 128.

I have the schematic, source code and software for it.

PM me for details.
 

    G

    gusagar

    Points: 2
    Helpful Answer Positive Rating
google around I did see a multichip programmer for atmel, PIC and others,
Oh I remember it was called lancos.
Google around and you ll find it. nice small programmer.
 

here is a 3d view of gtp-usb. I have the diagram but i have not build this yet.

5_1177478562.jpg
 

Thanks nomad13.
I´ll be glad if you share the offered info to my mail

gusagar2003*hotmail.com

Thanks so much
 

Here are the files you need:

For the diagram I use eagle.

For the driver, software and firmware download this from
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top