Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pic IR RC5 Encoder required

Status
Not open for further replies.
UroBoros

UroBoros

Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
rc5 encoder

hello
I am looking for a IR RC5 encoder in assembler using PIC! . Any suggessions or examples please!!
 

protocolo ir sony con pic

Hi!

This is the modulation format in attachment. All you have to do is decode it (measure the signal pause duration). Use any IR module receiver (from VCR or other similar).

All best,
Trax
 

ir encoder with pic micro

hello
Thanks.I have decoded the pause between signals and derived a seperate code for each transmission. But simply cannot recoganise the coding scheme for transmitters available with me.None of them are RC5 or sony .Something else. Some data packages are even mote than 50 bytes long or it seems so to me .Any clarifications
Thank you
 

sample encoder ir

@Picstudent

Can you tell me what protocol the remotes were using ?
 

ir remote pic12f629

Picstudent said:
hello
Thanks.I have decoded the pause between signals and derived a seperate code for each transmission. But simply cannot recoganise the coding scheme for transmitters available with me.None of them are RC5 or sony .Something else. Some data packages are even mote than 50 bytes long or it seems so to me .Any clarifications
Thank you
Click to expand...

if you have the epe mag then you find a nice tool decode the full information rc5 and sirc code, along with starting packet and ending packet plus a comprehensive artical on both protocol and there working metod all stuff based on pic micro

regards
Fragrance
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
sony encoder using pic

Hello Picstudent,

Following image is our CR-2I, RC-5 compatible mini remote commander. It has 5 buttons. simulates standart TV remote commander with RC5 coding. It based on PIC12F629 with sleep function.

If you would like to know all technical details (schematics, pcb, asm etc) please let me know your e-mail. I'm going to send you.

Regards.

[/img]
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
rc5 encode

@DDS

Please PM me the details too :)
 

encodeur rc5

Fragrance said:
Picstudent said:
hello
Thanks.I have decoded the pause between signals and derived a seperate code for each transmission. But simply cannot recoganise the coding scheme for transmitters available with me.None of them are RC5 or sony .Something else. Some data packages are even mote than 50 bytes long or it seems so to me .Any clarifications
Thank you
Click to expand...

if you have the epe mag then you find a nice tool decode the full information rc5 and sirc code, along with starting packet and ending packet plus a comprehensive artical on both protocol and there working metod all stuff based on pic micro

regards
Fragrance
Click to expand...

Which edition ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top