Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to draw a POLY NOT Contact layer?

Status
Not open for further replies.
N

no_mad

Full Member level 5
Joined
Dec 10, 2004
Messages
271
Helped
30
Reputation
60
Reaction score
11
Trophy points
1,298
Location
Naboo
Activity points
2,489
What's this?

Hi all,

How to draw this layer? ex. POLY NOT Contact

I got this from the LVS rules file. Someone please shed some light here.

Thanks in advance.
-no_mad
 

Re: What's this?

It depends on the technology you use, but normally it means a region of POLY that's not interacting with any CONTACTs

Regards,
--Knack
 

Re: What's this?

It's not real physical layer- at least I have never seen any.

Actually, it's just logical layer which helps you to extract netlist or get DRC information from layout, such as, we know that "poly AND active" is MOS channel area, and "active NOT (poly AND active)" is source or drain.
 

    N

    no_mad

    Points: 2
    Helpful Answer Positive Rating
Re: What's this?

no_mad said:
Hi all,

How to draw this layer? ex. POLY NOT Contact

I got this from the LVS rules file. Someone please shed some light here.

Thanks in advance.
-no_mad
Click to expand...

this is just to define a layer in the layer setup in layout tool. example

defination of layerA is

layerA = POLY NOT contact.

so if you draw poly layer it is equal to layerA

-evilguy-
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top