Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need clock generating circuit

Status
Not open for further replies.
A

asueee0

Advanced Member level 4
Joined
Dec 26, 2005
Messages
109
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,299
a clock of 10MHZ is given, we need this clock to generate another clock that has the same frequency as the original one, so that these two clocks could be used to control a switch cap circuit, any one have any idea how how to design this clock generating circuit?
 

22_1164697479.GIF
 

    A

    asueee0

    Points: 2
    Helpful Answer Positive Rating
The circuit is usually used in sigma-delta modulator.

Thanks for your sharing.
 

    A

    asueee0

    Points: 2
    Helpful Answer Positive Rating
not only for sigma-delta modulator, this circuit is widely used for switch capacitor circuit to generate two phase non-overlap clock
 

    A

    asueee0

    Points: 2
    Helpful Answer Positive Rating
yes. I dont think the clkgen of sigma-delta is different.
 

    A

    asueee0

    Points: 2
    Helpful Answer Positive Rating
where is it from, could i have more details? if the clock frequency is slightly diferent, do i have to modify anything? to implement those gates (use complementary cmos logic)in 0.35um technology,what need to be paid attention? is there any simpler circuit could do the job?
 

10MHz is not a high frequency. maybe there're easier design. you can try it.
all the problems can be found out by simulation,I believe.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top