Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RF power device for 5.3 to 5.9GHz

Status
Not open for further replies.
J

johngr

Newbie level 2
Joined
Jul 31, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
Looking for a device that works between 5.3 to 5.9GHz and has a 1dB compression point just above 50dBm.

any help would be appreicated

John G
 

Dear,

Check this from EUDYNA(FUJITSU):

**broken link removed**

Output power is about 47dbm. you can use 2 device with a hybrid combiner for 50 dbm.

The Best Property of this device : Internally Matched to 50ohms and doesn't need

any external matching!

Good Luck!
 

    J

    johngr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top