Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Smith Chart Question in ADS2005

Status
Not open for further replies.
ahmad_abdulghany

ahmad_abdulghany

Advanced Member level 4
Joined
Apr 12, 2005
Messages
1,206
Helped
102
Reputation
206
Reaction score
22
Trophy points
1,318
Location
San Jose, California, USA
Activity points
11,769
impedance matching smith chart tool agilent ads

How can I use the Smith Chart Tool in Agilent A.D.S.2005A for matching ?
Can anyone give me the required steps accompined by the theory needed?

Thanks,
Ahmad,
 

smith chart questions

well i don't think ADS 2005A can be used for matching . i have used it to see the response of the theoritically matched circuits . in case of lumped circuits the matching can be done using the software called MIMP , then the matched circuit can be verified using ADS.
 

llsmith.exe

anup dhital said:
well i don't think ADS 2005A can be used for matching .
Click to expand...

For me, I'm sure 100% that it make it, i also made it, but I found something like auto matching, and i couldn't use it! also for matching itself on ADS, i need to know the true steps to perform..

Ahmad,
 

automated smith chart, version 4.0

You have to choose "smith tool smart component".
 

anup dhital

It could be done with microwave office
 

llsmith impedance

1. Put SmithchartMatching Comp on the schematic
2. Then [TOOLS]->[SMITH]
3. Set Load condition by typing or put load term comp on the smithchart
4. select RLC/transmission line component and drag mouse to wanted position
5. check component name on the top right side
6. update the circuit (button on the bottom side)

that's it.

however this one is only for crude estimation or educational purpose, i think.
 
ads2005

chiara said:
1. Put SmithchartMatching Comp on the schematic
2. Then [TOOLS]->[SMITH]
3. Set Load condition by typing or put load term comp on the smithchart
4. select RLC/transmission line component and drag mouse to wanted position
5. check component name on the top right side
6. update the circuit (button on the bottom side)

that's it.

however this one is only for crude estimation or educational purpose, i think.
Click to expand...

Thanks for your contribution,

But i saw something in Smth Chart tool and i dont know how to use it, somthing called automatic matching, or something like that, how can i use it? i can use discrete element to move on smith chart as you mentioned, but i want to konw about automatic matching,

Thanks
Ahmad,
 

anup dhital and city of joondalup

there is a little sofeware LLsmith.exe. it is very convenient for impedance matching.you can try it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top